DHP, PLATE TYPE HEAT EXCHANGERS

Variety Of Plate Heat Exchanger

Advantage Of Using DHP Plate Heat Exchangers

Saving The Installation Space

Since the heat transfer efficiency is high, only 2-30% installation space is required comparing to the same capacity of the multi-tubular heat exchanger.

Minimum Heat Loss

Heat is emitted in the side of the plate type heat exchanger and because the space is not much required the heat loss can be minimized due to less heat generation volume even when insulation or heat insulating materials are not used.

High Heat Transfer Coefficients

DHP Plate Heat Exchangers provide high rates of heat transfer, due to the turbulence inducing shape of the plates.
The special gasket configuration of the plates prevents any mixing of the media being processed.
In the port area both fluids are separated by double gaskets.
Additional safety is ensured by the leakage gap.

Low Contamination

Strong turbulent flow formed by the bump in flow way and short staying time of the fluid inside the heat exchanger will result in getting the effect to avoid scale adhesion.
Convenient disassembling and assembling.
Cleaning is easy to handle the contamination in an efficient way.

Applicability & Standardization

All the components or parts are standardized and the compatibility of the parts is good. Plate number can be increased or decreased depending on the change of the capacity. Cleaning or replacement is easy when the plate or gasket is worn out.